Aruba AP-120 Series Manual de usuario descargar pdf (Pagina 10)

10 Aruba AP-120 Series Indoor Access Point | Installation Guide

z Altitude: 8,000 ft @ 28ºC (82.4ºF)

z Mounting: Wall, ceiling, or desktop mountable

z Antennas:

 3 integrated articulating dual-band antenna elements (AP-121, AP-125)

 3 RP-SMA interfaces for external antennas (AP-120, AP-124)

z Visual Status Indicators (LEDs): See Table 3

Electrical

 Ethernet:

 2 x 100/1000 Base-T auto-sensing Ethernet RJ-45 Interfaces

 MDI/MDX

 IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)

 Power over Ethernet (IEEE 802.3af compliant), 48V DC/200mA (see Table 1 for pin

configuration)

z Power:

 5 VDC power interface, supports powering through an AC-to-DC mains electric power adapter

 POE support on Ethernet ports:

– 802.3af-compliant POE sourcing devices

– POE+ (56 V @ 350 mA)

Wireless LAN

z Network Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11a, and IEEE 802.11n (draft)

z Antenna Type:

 Integrated 802.11a/b/g/n omni-directional high-gain antenna

 Detachable 802.11a/b/g/n omni-directional high-gain antenna

z Antenna Gain (Integrated Antennas):

 2.4 – 2.5 GHz/3.2 dBi (max)

 5.180 – 5.825 GHz/5.2 dBi (max)

z Radio Technology:

 Orthogonal Frequency Division Multiplexing (OFDM)

 Direct Sequence Spread Spectrum (DSSS)

z Radio Modulation Type:

 802.11b - CCK, BPSK, QPSK

 802.11g - CCK, BPSK, QPSK,16-QAM, 64-QAM

 802.11a - BPSK, QPSK,16-QAM, 64-QAM

 802.11n draft 2.0

z Media Access Control: CSMA/CA with ACK

NOTE

If a power adapter other than the one provided by Aruba Networks is used in the US or

Canada, it should be cULus (NRTL) Listed, with an output rated 5 VDC, minimum 4A,

marked “LPS” or “Class 2,” and suitable for plugging into a standard power receptacle in the

US and Canada.

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Aruba AP-120 Series Manual de usuario Pagina 10